Tee Grid | Heavy Duty Main

Heavy Duty Main Tee

We are renowned manufacturers and suppliers of Grid Suspension System. This system is fabricated using premium quality raw material, which is procured from our trusted sources. Additionally, our range is highly appreciated for its long life. This high quality durable system is available in the market at reasonable prices.


It shall be an exposed lay-in system to fit 600 mm x 600 mm or 600 mm x 3600 mm ceiling modules
It shall be suspended By a 4mm diameter adjustable quick fit hanger rod system. Main Tee shall be in 38mm/33mm and the height exposed portion (polyester coated) shall be 24mm
Cross tee shall be 26mm height and expose portion shall be 24mm. All system components are made of roll formed hot dipped galvanized steel of 0.30mm thickness with zinc coating of not less than 120g/m2 and a minimum tensile strength of 240 MPA
Wall angle is 24mm height x 24mm and expose portion is made of 0.40mm thick pre coated coil. Both ends of the Main Tee have integral splices, which can be enjoined firmly be inserting a tab on the one end of one section into the slot in the adjoining section
The exposed flange finish shall be pre painted polyester coated galvanized steel, not less than 0.30 in off-white color with a coating thickness of 20 microns top coat and 8 microns primer alkyd backer on backside. The main runner has fire notches to sustain the grid system during fire


Measurement 38x24x3600 | Quantity/ Box 25 Pcs.