84R Decorative Ceiling
84 R ceiling system comprises of 84 mm x 16 mm panels without flush profile (for 100 mm module only) roll formed out of metal coils. Panels are fixed on to roll formed carriers 32 mm wide x 39 mm deep made out of 0.9/0.7 mm Aluminium or 0.5 mm galvanised steel sheet with cutouts to hold the panels in module of 100 mm at maximum 1.7 m c/c without insulation and at maximum 1.5 m c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1.3 m c/c. Hangers are fixed to the roof by ceiling bracket. Panels are available in max. Lengths up to maximum 6 m to suit site dimensions.. Edge profiles or wall angles are 24 mm X 24 mm X 0.5 mm thick and match the colour of the panel. Flush profile can be use in between 2 panels to fill gap of 16mm.
Metal used for construction of both panels and grid: Aluminium Alloy AA5050, AA3105 or AA1050 is used to make the panels carrier . Thickness is 0.5 mm for panels and 0.9/0.7 mm for carriers.Panel are made of Galvanised steel with 180 / 120 gsm Zinc coating and 20 microns polyester paint coil coating sheets. Panels can be available in 50 microns polyester powder coating galvanized steel with 120/180 gsm Zinc coating or in aluminium alloy in different colours.Finish of the panels: Panels are available in plain and perforation of 2.5mm and 1.7mm